Readwyn 0.1.0

How to eject a Kindle or a Kobo from a Mac

A Kindle or a Kobo that your Mac shows as a drive is ejected like any other storage device. Apple’s guide lists three ways: select it and choose File > Eject, click the Eject button beside its name in the Finder sidebar, or drag its icon from the desktop to the Trash. Then unplug the cable. In Readwyn, “Eject device” at the top of the Sync screen ejects it from inside the app, and it waits if Readwyn is still writing to the e-reader. Readwyn works with a Kindle only when the Mac mounts it as a drive, and the Mac doesn’t mount every Kindle: Amazon’s help page on USB transfers says the Kindle Scribe and the Kindles released in 2024 need a separate application to transfer files over USB on a Mac, such as Amazon’s own Send to Kindle app. For one of those Kindles there’s nothing to eject in Finder: the same page says to select Disconnect on the Kindle’s screen or to unplug the cable.

In Finder

A Kobo joins the Mac only after you tap Connect on its screen, and its drive is called KOBOeReader. Kobo’s steps for a Mac are to open a Finder window, right-click KOBOeReader in the sidebar, click “Eject KOBOeReader”, and unplug. The same article gives the reason in four words: you eject “to avoid losing data”.

For a Kindle, Amazon has said two things over the years. The user’s guide of the first Kindle Paperwhite, from 2012, tells Mac owners to click the Eject button next to the Kindle in any Finder window, or to drag it from the desktop to the Trash. The Kindle then leaves what Amazon calls USB drive mode and carries on charging. Until it does, you can’t read on it: the Kindle, says the guide, “is not usable as a reading device while in USB drive mode”. Amazon’s page for the first Kindle puts the eject before the unplug: unmount or eject the Kindle with the computer, then disconnect the cable. Amazon’s current help page, the one linked above, ends with a note that there’s no need to select an eject button on the computer at all. The only Mac steps on that page are those of the Send to Kindle app, which shows the Kindle’s files in a window of its own.

The same page says that a Kindle released before 2024, other than the Scribe, needs no separate application. If yours sits in Finder as a drive with a documents folder, it’s in the USB drive mode that the older guides describe, so eject it first and unplug it second. When it should be there and isn’t, check the cable, a macOS alert, and a Finder setting. If you don’t know which model you have, its serial number or its Device Info screen will tell you.

In Readwyn

The Sync screen has the button for a Kobo and for a Kindle alike.

The Sync screen of a Kobo Clara 2E, connected over USB, with the button Eject device at the top right
“Eject device”, at the top right of the Sync screen

When the eject is done, a message names the e-reader: “Ejected Kobo Clara 2E. You can unplug it.” Readwyn never reads a Kindle’s serial number, so it doesn’t know the model, and for a Kindle the message uses the name of the drive, for example “Ejected Kindle. You can unplug it.”

The button knows when Readwyn itself is in the middle of a write. That can be a book going over with “Send to device”, the changes of a Readwyn → Device sync, a “Remove from device”, or the small file .readwyn/device-id that the first sync or send leaves on the e-reader. Click “Eject device” during one of these and an alert says “Readwyn is still writing to the Kindle” (or “the Kobo”), with the line “Wait for the sync to finish before you unplug it, or the device may lose its highlights.” “Wait” closes the alert and ejects nothing. “Stop and eject” ejects, but the eject still lets the write end first. If the write ends while the alert is open, the alert closes by itself.

That wait lasts 30 seconds at most. If the write is still going then, nothing is ejected and Readwyn says “Readwyn is still writing to the device. Try again when the sync ends.” In a test on a copy of a real Kindle’s disk, with a write held open for 2 seconds, the eject waited 2.0 seconds and then took the volume away.

When the Mac refuses

Finder sometimes answers that the disk can’t be ejected. Apple’s guide says that another app or user may be using a file on it. Kobo’s article on problems ejecting is more specific: a program is reading the e-reader, an anti-virus program is scanning it, a file manager window is showing its contents, a program has a file on it open, or the operating system is indexing it. Its advice is to wait and try again, then to close every window and app that might be using the e-reader. The last resort is the same at Kobo and at Apple: shut the computer down, then unplug. Apple puts one step before it, which is to log out, log in again, and try the eject once more.

What the e-reader does next

A Kobo takes in new books only once it has left USB mode. Kobo’s guide to adding files from a computer says you’ll see an “Importing content” message after you unplug the cable. That’s why Readwyn’s message after a send reads “Copied to the device. Eject the device so it adds the book.” Apply a Readwyn → Device sync straight after a send, before the Kobo has had that chance, and Readwyn stops with “The Kobo is still adding books. Eject it, let it finish, and connect it again.” That refusal comes from one of the rules Readwyn keeps when it writes to a Kobo.

A classic Kindle, one with firmware 1 to 4, needs one more step after a sync that wrote collections to it, which is still an experimental feature. Readwyn’s message then ends with “Restart the Kindle to see the collections.” So eject it and unplug it. Then, on the Kindle, press Home, then Menu, choose Settings, press Menu again, and choose Restart. The power button doesn’t load the collections.